Allocate A Key Expansion Module Type; Allocate A Key Expansion Module Type With The Phone Menu; Reset The Single Lcd Screen Key Expansion Module - Cisco 8800 Series Administration Manual

Hardware and Accessory Installation

Allocate a Key Expansion Module Type

You can assign the type of key expansion module that the phone supports:
• BEKEM
• CP-8800-Audio
• CP-8800-Video
Before you begin
• Access the phone administration web page. See
Procedure
Step 1 Select Voice > Att Console.
Step 2
Set the KEM Type field as described in the
Step 3 Press Submit All Changes.

Allocate a Key Expansion Module Type with the Phone Menu

You can assign the type of key expansion module that the phone supports.
Procedure
Step 1
Press Applications
Step 2 Select User preferences > Attendant console preferences > KEM type.
Step 3
Select the key expansion module type.
Step 4 Press Save.

Reset the Single LCD Screen Key Expansion Module

If you are having technical difficulties with your Cisco IP Phone 8800 Key Expansion Module, you can reset
the module to the factory default settings.
Access the Phone Web Page, on page
General, on page 340
.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Allocate a Key Expansion Module Type
88.
table.
119