Cisco 8800 Series Administration Manual page 122

Bluetooth Wireless Headsets
The phone supports various Handsfree Profile features that enable you to use hands-free devices (such as
Bluetooth wireless headsets) to perform certain tasks without handling the phone. For example, instead of
pressing Redial on the phone, users can redial a number from their Bluetooth wireless headset by following
instructions from the headset manufacturer.
These hands-free features apply to Bluetooth wireless headsets that are used with the Cisco IP Phone 8851
and 8861:
• Answer a call
• End a call
• Change the headset volume for a call
• Redial
• Caller ID
• Divert
• Hold and accept
• Release and accept
Hands-free devices may differ as to feature activation. Device manufacturers may also use different terms
when referring to a feature.
Important Only one headset type works at any given time. If you use both a Bluetooth headset and an analog headset
that are attached to the phone, enabling the Bluetooth headset disables the analog headset. To enable the analog
headset, disable the Bluetooth headset. Plugging a USB headset into a phone that has Bluetooth headset
enabled disables both the Bluetooth and analog headset. If you unplug the USB headset, you can either enable
or disable the Bluetooth headset to use the analog headset.
Users can set their Bluetooth headset as the preferred headset, even when a USB headset is connected to the
phone. On the phone, the user selects Applications
audio device and chooses Bluetooth as the preferred audio device.
For information about how to use your Bluetooth wireless headset, see:
• Cisco IP Phone 8845, 8851, 8861, and 8865 Multiplatform User Guide
• User guides provided with your headset
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
106
Hardware and Accessory Installation
> User preferences > Audio preferences > Preferred