Cisco 8800 Series Administration Manual page 23

New and Changed Information
Feature
Call Recording
Cisco IP Phone 8845 and 8865 Support
Factory Reset Button in the Phone Web Page
IPv6 Support
Presence
New and Changed Features for Firmware Release 11.0(1)
All new features have been added to
Revision
Added MOS enhancement
Added how to confgure missed call
indication on the Configuration Utility
Page
New and Changed Features for Firmware Release 11.0(1)
New or Changed Sections
Enable Remote Call Recording with SIP REC, on
page 155
Enable Remote Call Recording with SIP INFO, on
page 157
Call Doesn't Record, on page 355
Configure the Video Codec, on page 52
Video Configuration, on page 319
Video Transmit Resolution Setup, on page 50
Control the Video Bandwidth, on page 167
Video Configuration, on page 307
Disable Video Services, on page 167
Video Configuration, on page 340
Factory Reset the Phone with the Web UI Button, on
page 216
Factory Reset, on page 257
Network Configuration Fields, on page 40
IPv6 Information, on page 249
Network Settings, on page 265
IPv6 Settings, on page 266
Set Up a Phone for Presence, on page 160
Broadsoft XMPP, on page 313
Phone Presence Message: Disconnected from Server,
on page 356
Presence Status Doesn't Work, on page 356
Telephony Features for Cisco IP Phone, on page
Updated Section
See MOS-LQ and MOS-CQ values in
252
Supplementary Services, on page 336
Configure Missed Call Indication with the Configuration Utility,
on page 158
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
179.
Line Call Status, on page
7