Cisco 8800 Series Administration Manual page 267

Cisco IP Phone Troubleshooting
Parameter
Network Packets Sent
Network Packets Recv
External IP
Operational VLAN ID
SW Port
PC Port
Upgrade Status
SW Port Config
PC Port Config
Last Successful Login
Last Failed Login
Dot1x Authentication
Parameter
Transaction status
Protocol
Ext Status
Parameter
Registration State
Last Registration At
Next Registration In Seconds
Message Waiting
Mapped SIP Port
Hoteling State
Description
Total number of network packets sent.
Total number of network packets received.
External IP of the phone.
ID of the VLAN currently in use if applicable.
Displays the type of Ethernet connection from the IP
phone to the switch.
Displays the type of Ethernet connection from PC
Port.
Displays status of the last phone upgrade.
Displays the type of SW port configuration.
Displays the type of PC port configuration.
Displays the time when the phone has last successful
log in.
Displays the time when the phone has last failed log
in.
Description
Indicates if the phone is authenticated.
Displays the protocol of the registered phone.
Description
Shows "Registered" if the phone is registered, or "Not
Registered" if the phone is not registered to the ITSP.
Last date and time the line was registered.
Number of seconds before the next registration
renewal.
Indicates whether message waiting is enabled or
disabled.
Port number of the SIP port mapped by NAT.
Indicates whether Hoteling is enabled or disabled.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Dot1x Authentication
251