Cisco 8800 Series Administration Manual page 347

Cisco IP Phone Troubleshooting
Parameter
XSI Authentication Type
Login User ID
Login Password
Anywhere Enable
Block CID Enable
CFWD Enable
Description
Determines the XSI authentication type. Select Login
Credentials to authenticate access with Login User
ID and Login Password. Select SIP Credentials to
authenticate access with the register Auth ID and
Password of the SIP account registered on the phone.
Default: Login Credentials
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
For any XSI Authentication Type, you must enter
Login User ID. Without Login User ID, the
BroadWorks Anywhere feature does not work.
Default: Blank
Alphanumeric password associated with the Login
User ID.
Enter Login Password, when you select Login
Credentials for XSI authentication type.
Default: Blank
Enables BroadWorks Anywhere feature on an
extension.
If you choose Yes, Anywhere is enabled on this line,
and the user can use the phone menu to add multiple
locations to this specific line.
Default: Yes
Enables XSI Caller ID blocking on a line.
Choose Yes to enable the synchronization of blocking
caller id status with the server using XSI interface.
Choose No to use the phone's local blocking caller id
settings.
Enables or disables call forwarding status sync on a
line via XSI service.
Choose Yes to enable the phone to synchronize the
call forwarding status with the server using the XSI
service. Choose No to disable this feature.
Note
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
XSI Line Service
• When Feature Key Sync is set to
Yes, FKS takes precedent over XSI
synchronization.
• If XSI host server and credentials are
not entered and the CFWD Enable
field is set to Yes, the phone user can't
forward calls on the phone.
331