Place A Call On The Key Expansion Module - Cisco 8800 Series User Manual

Accessories
Two-Column Mode

Place a Call on the Key Expansion Module

Procedure
Step 1
Press the line button on the key expansion module.
Step 2
Dial a phone number.
Step 3
Pick up your handset.
If you are using a single-LCD screen expansion module, you can set up the module in two-column
mode.
In two-column mode, each button on the left and right of the screen is assigned to a different phone
number, speed-dial number (or name or other text label), phone service, or phone feature. In this
configuration, the key expansion module displays up to 18 items on page 1, and up to 18 items on page
2.
Figure 6: Key Expansion Module withTwo Columns
Place a Call on the Key Expansion Module
Cisco IP Phone 8800 Series User Guide
87