Cisco 8800 Series Administration Manual page 172

Enable Remote Call Recording with SIP REC
Recording Mode in Server
Never
On Demand
On Demand with User
Initiated Start
During a recording, your user sees different icons which depend on the recording state. The icons are displayed
on the Calls screen and also on the line key on which the user is recording a call.
Table 21: Recording Icons
Icon
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2 In the Supplementary Services section, click Yes or click No to enable or to disable call recording in the
Call Recording Serv field.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
156
Recording Softkeys Available on the Phone
PauseRec
ResumeRec
When a call is connected, recording starts automatically and your user can
control the recording.
Record
PauseRec
ResumeRec
When a call is connected, recording starts automatically but the recording is
not saved until the user presses the Record softkey. Your user sees a message
when recording state changes.
Record
PauseRec
StopRec
ResumeRec
The recording only starts when your user presses the Record softkey. Your
user sees a message when recording state changes.
Meaning
Recording in progress
Recording in progress (8811)
Recording paused
Recording paused (8811)
Access the Phone Web Page, on page
Cisco IP Phone Administration
88.