Enable and Disable Reverse Name Lookup
Enable and Disable Reverse Name Lookup
Before you begin
• Configure one of these directories before you can enable or disable the reverse name lookup:
• Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2
In the Supplementary Services area, set the Reverse Phone Lookup Serv to:
• Yes–Enable the reverse name lookup feature.
• No–Disable the reverse name lookup feature.
Step 3
Click Submit All Changes.
Step 4
Alternative method is to use the config.xml file to provision the reverse name lookup feature.
<Reverse_Phone_Lookup_Serv ua="na">Yes</Reverse_Phone_Lookup_Serv>
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
238
• LDAP Corporate Directory
• XML Directory
Access the Phone Web Page, on page
Cisco IP Phone Administration
88.