Cisco 8800 Series Administration Manual page 334

Programmable Softkeys
Parameter
Number Mapping
Programmable Softkeys
Parameter
Programmable Softkey Enable
Idle Key List
Missed Call Key List
Off Hook Key List
Dialing Input Key List
Progressing Key List
Connected Key List
Start-Xfer Key List
Start-Conf Key List
Conferencing Key List
Releasing Key List
Hold Key List
Ringing Key List
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
318
Description
Can be blank if not needed.
Note With the LDAP number mapping, you can manipulate
the number that was retrieved from the LDAP server.
For example, you can append 9 to the number if your
dial plan requires a user to enter 9 before dialing. Add
the 9 prefix by adding (<:9xx.>) to the LDAP Number
Mapping field. For example, 555 1212 would become
9555 1212.
If you do not manipulate the number in this fashion, a user can
use the Edit Dial feature to edit the number before dialing out.
Default: Blank
Description
Enables programmable softkeys.
Softkeys that display when the phone is idle.
Softkeys that display when there is a missed call.
Softkeys that display when the phone is off-hook.
Softkeys that display when the user must enter dialing
data.
Softkeys that display when a call is attempting to
connect.
Softkeys that display when a call is connected.
Softkeys that display when a call transfer has been
initiated.
Softkeys that display when a conference call has been
initiated.
Softkeys that display when a conference call is in
progress.
Softkeys that display when a call is released.
Softkeys that display when one or more calls are on
hold.
Softkeys that display when a call is incoming.
To silence an incoming call, you can add Ignore
softkey.
Cisco IP Phone Troubleshooting