S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Installing a Cisco Nexus 7010 Chassis
This chapter describes how to install a new or relocated Cisco Nexus 7010 chassis in a rack or cabinet.
For information about installing a Cisco Nexus 7009 chassis, see
7009 Chassis."
a Cisco Nexus 7018 Chassis."
7000 Series chassis, see
This chapter includes the following sections:
•
•
•
•
•
•
•
Preparing to Install the Switch
This section includes the following topics:
•
•
•
You must set up one four-post, 19-inch EIA rack or cabinet before you can install the Cisco Nexus 7010
Note
chassis. Make sure that you order the rack or cabinet and have it delivered before installing the chassis.
Required Tools
Before you install the Cisco Nexus 7010 chassis into a rack, make sure that you have the following tools
and equipment:
•
•
OL-23069-06
For information about installing a Cisco Nexus 7018 chassis, see
Chapter 5, "Installing Power Supply Units."
Preparing to Install the Switch, page 3-1
Installing the Bottom-Support Rails on the Rack, page 3-3
Installing the Chassis, page 3-7
Grounding the Cisco Nexus 7010 Chassis, page 3-11
Installing and Formatting CompactFlash Cards, page 3-16
Installing the Front Doors and Frame Assembly, page 3-17
Installing the Air Filter, page 3-23
Required Tools, page 3-1
Installing a Four-Post Rack or Cabinet, page 3-2
Unpacking and Inspecting a New Switch, page 3-3
Mechanical lift capable of lifting 550 pounds (250 kg)
Number 1 Phillips screwdriver with torque capability
C H A P T E R
For information about installing power supply units in the Cisco Nexus
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3
Chapter 2, "Installing a Cisco Nexus
Chapter 4, "Installing
3-1