Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 71

Chapter 2 Installing a Cisco Nexus 7009 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 2-21
1 Four M4x8 pan-head screws that fasten the
hinge bracket to the chassis.
Tighten the four M4x8 screws that fasten the hinge bracket to the chassis to 11 to 15 in-lb (1.2 to
Step 6
1.7 N·m).
Tighten the four M4x8 screws that fasten the hinge bracket to the cable management frame to 11 to
Step 7
15 in-lb (1.2 to 1.7 N·m).
Align the two captive screws on the air intake frame to the two screw holes below the cable management
Step 8
frames on the chassis as shown in
OL-23069-06
Attaching the Hinge Bracket to the Cable Management Frames and Chassis
Figure 2-22.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Door and Air Intake Frame
2 Four M4x8 pan-head screws that fasten the
hinge bracket to the left and right cable
management assemblies.
2-31