Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 238

Replacing a Supervisor Module
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Caution To prevent ESD damage, avoid touching the electronic circuitry and prevent anything else from coming
in contact with the circuitry.
Step 9 If you are removing the module from a Cisco Nexus 7010 chassis, rotate the module 90 degrees
counterclockwise so that it is horizontal and you can see its circuitry from above.
Place the removed module in an antistatic bag.
Step 10
Repack the bagged I/O module in its original packing materials as shown in
Step 11
Figure 9-6
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
9-16
Repacking a Supervisor Module
Chapter 9 Replacement Procedures
Figure 9-6.
OL-23069-06