Module Connectors - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

RJ-45 Module Connectors
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Table B-13
Part Number
DWDM-SFP-3582
DWDM-SFP-3504
DWDM-SFP-3425
DWDM-SFP-3346
DWDM-SFP-3268
DWDM-SFP-3190
DWDM-SFP-3112
DWDM-SFP-3033
RJ-45 Module Connectors
The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil
twisted-pair or unshielded twisted-pair cable from the external network to the following module
interface connectors:
•
•
•
To comply with GR-1089 intrabuilding, lightning immunity requirements, you must use foil twisted-pair
Caution
(FTP) cable that is properly grounded at both ends.
Figure B-7
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
B-16
DWDM SFP Transceivers (continued)
100-GHz
ITU Channel
52
53
54
55
56
57
58
59
Supervisor modules
– CONSOLE port
COM1/AUX port
–
MGMT ETH port
–
CMP MGMT ETH port
–
48-port 10/100/1000 Ethernet I/O modules (N7K-M148GT-11 and N7K-M148GT-11L)
10/100/1000 ports
–
Cisco Nexus 2248TP Fabric Extender
100/1000 ports that connect to servers
–
shows the RJ-45 connector.
Appendix B
Description
Longwave 1535.82 nm laser
Longwave 1535.04 nm laser
Longwave 1534.25 nm laser
Longwave 1533.47 nm laser
Longwave 1532.68 nm laser
Longwave 1531.90 nm laser
Longwave 1531.12 nm laser
Longwave 1530.33 nm laser
Transceivers and Module Connectors
OL-23069-06