Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 208

Configuring EPLDs
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
By default, these commands display the used and free memory for the active supervisor. If your switch
has an additional supervisor (a standby supervisor), use the show module command to find the module
number for the other supervisor, use the attach module command to attach to the module number, and
then use the dir bootflash: or dir slot0: command to determine the amount of used and free memory.
See Example 7-11
determine the amount of available slot0 memory.
Example 7-11 Determining the Amount of Available Bootflash Memory
switch# dir bootflash:
...
2386687
108604827
24345600
23667200
...
Usage for bootflash://sup-local
542175232 bytes used
1296683008 bytes free
1838858240 bytes total
switch# show module
Mod
---
6
7
8
9
10
...
switch# attach module 9
Attaching to module 9 ...
To exit type 'exit', to abort type '$.'
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch#
Example 7-12 Determining the Amount of Available Slot0 Memory
switch# dir slot0:
...
Usage for slot0://sup-local
2044850176 bytes free
2044854272 bytes total
switch# show module
Mod
---
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
7-44
to determine the amount of available bootflash memory, and see
4096 Jul 13 09:13:43 2011
May 20 09:09:50 2011
Jun 09 09:03:45 2011
Aug 18 12:03:47 2011
Oct 10 09:07:28 2011
Ports Module-Type
----- -------------------------------- ------------------ ------------
8 10 Gbps Ethernet XL Module
48 1/10 Gbps Ethernet Modul
48 1000 Mbps Optical Ethernet XL Mo N7K-M148GS-11L
0 Supervisor module-1X
0 Supervisor module-1X
4096 bytes used
Ports Module-Type
----- -------------------------------- ------------------ ------------
Chapter 7
lost+found/
n7000-s1-debug-sh.6.0.1.bin
n7000-s1-dk9.5.2.1.bin
n7000-s1-kickstart.6.0.0.bin
n7000-s1-kickstart.6.0.1.bin
Model
N7K-M108X2-12L
N7K-F248XP-24
N7K-SUP1
N7K-SUP1
Model
Managing the Switch Hardware
Example 7-12 to
Status
ok
ok
ok
ha-standby
active *
Status
OL-23069-06