Replacing the Front Doors and Frame Assembly on the Cisco Nexus 7010 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
1
Unscrew four captive screws from the chassis. 2
From the back of the EMI panel, unscrew each of the four screws that attach the two side frame
c.
pieces to the EMI panel, and remove the side frame pieces (see
Figure 9-17
1
Right side frame.
2
Left side frame.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
9-44
Removing the Side Frame Assemblies From the EMI Panel
Chapter 9
Remove the EMI panel from the chassis.
Figure
9-17).
3
Unscrew two 6-32 x 1/2-inch flat-head screws
to remove the right side frame.
4
Unscrew two 6-32 x 1/2-inch flat-head screws
to remove the left side frame.
Replacement Procedures
OL-23069-06