Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 386

Repacking the System Components
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure E-18
1
Lower pallet
2 Raised portion of the pallet
3 Mounting brackets (two shown and two are on
the other side of the chassis)
Align the screw holes in the side of the chassis with the screw holes in the vertical sides of the two angle
Step 20
brackets. Fasten the two angle brackets to the chassis by securely tightening the four screws for each
bracket. See
Attach two more angle brackets to the pallet on the other side of the chassis. Make sure that the four
Step 21
screw holes on the vertical side of each bracket align with four holes in the chassis.
Use four screws to securely attach each of the additional two brackets to the chassis.
Step 22
Securely fasten the two bolts on each of the four angle brackets to the pallet.
Step 23
Place the packing bag over the chassis.
Step 24
Place the chassis packing cushion on top of the bagged chassis as shown in View A in
Step 25
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-30
Attaching the Chassis to the Shipping Pallet
Figure E-18.
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
4
Bolts holding brackets to the upper pallet
5 Screws holding the chassis to the brackets
Figure E-19.
OL-23069-06