Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 375

Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure E-8
1 Open the latch handle until it clicks.
Press the locking button on the inside surface of the door behind the opened latch to flatten the latch
d.
handle to the front side of the door (see
Open the box for the front door. You can find this box in the box that contains the front door and air
e.
intake frame kit. Make sure that four side cushions are aligned to the edges of the center panel of
the box (see Callouts 1 and 2 in
OL-23069-06
Removing the Front Door
Figure
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
2 Pull the door off the chassis.
Figure E-7).
E-9).
Repacking the System Components
E-19