Sbc622 Rear I/O Support; Figure 1-6 Sbc622 Vpx Backplane - GE OpenVPX VPXcel6 SBC622 Hardware Reference Manual

1.10 SBC622 Rear I/O Support

Figure 1-6 SBC622 VPX Backplane

38 SBC622 Hardware Reference Manual
The SBC622 provides rear I/O support for VPX with x16 or 4 x4 PCIe, two 10 GbE
ports, four GbE ports, DVI/VGA, six USB ports, two COM2 (RS232/RS422), up to
three SATA drives, eight GPIOs, two sets of XMC/PMC I/O signals. See Section
2.3 Open VPX Backplane Interface on page 44.
These signals are accessed by the use of a rear transition module (RTM) which
terminates the signals into industry standard connectors. Connector pinouts and
orientation for the SBC622, are defined in Appendix A: Connectors and Pinouts.
The SBC622 processor board is designed to support RTM VPX6U604. Other RTMs
may not support all available SBC622 rear I/O mentioned above. RTM
connections are defined in the appropriate RTM Installation Guides.
RTM
VPX
backplane
SBC622