Overview
10 SBC622 Hardware Reference Manual
Introduction
GE Intelligent Platforms' VPXcel6 SBC622* is a rugged OpenVPX compliant
Single Board Computer (SBC) in 6U VPX form factor designed to meet
requirements of a wide range of applications from industrial through fully
rugged defense and aerospace programs.
The SBC622 uses the Intel
Express Chipset Platform Controller Hub (PCH). Core i7 offers integrated
graphics and a memory controller, plus dual core processing that operates at
speeds up to 2.53 GHz.
SBC622ʹs 10 Gigabit Ethernet (GbE) Data Planes, Gigabit Ethernet Control Planes,
and PCIe Expansion plane deliver optimum scalability and interoperability. Two
onboard PMC/XMC expansion sites allow flexibility to configure the SBC622
according to the precise requirements of the application.
An onboard Flash device used for BIOS storage is large enough to optionally host
additional pre‐boot applications such as Built‐In Test (BIT).
SBC622 is compliant to the OpenVPX profile ʺMOD6‐PAY‐4F1Q2U2T‐12.2.1‐8ʺ.
The following table details the fabric support for this product:
Table 1 Fabric Support for SBC622
Data Plane
Expansion Plane
2 Channels of 10GBase-KX4 16 lanes of Gen2 PCIe
Per Section 5.1.5 of
Per section 5.3 of
OpenVPX Spec
OpenVPX Spec
SBC622 Board Form Factor and Packaging
The SBC622 board is a single‐slot board assembly meeting the mechanical and
electrical requirements defined in the ANSI/VITA 46.0, ANSI/VITA 46.9,
ANSI/VITA‐1.5‐2003, IEEE STD 1101.2‐1992 and ANSI/VITA 20‐2001, VITA 30
specifications. Both front panel and rear I/O external interfaces are supported.
The SBC622 is available in four rugged air‐ and conduction‐cooled build levels, is
optionally supported by comprehensive Deployed Test Software (BIT and BCS),
and provides operating system support for VxWorks
®
Core™ i7 Processor with the Mobile Intel
Control Plane UTPs
2 Channels of 1000Base-BX 2 Channels of 1000Base-T
Per section 5.1.1 of
OpenVPX Spec
®
QM57
Control Plane TPs
Per section 5.1.3 of
OpenVPX Spec
®
®
, Windows
and Linux
®
.