Front Panel Interface; Built-In Test (Bit) - GE OpenVPX VPXcel6 SBC622 Hardware Reference Manual

2.4 Built-In TEST (BIT)

48 SBC622 Hardware Reference Manual

2.3.11 Front Panel Interface

The convection cooled version of the SBC622 supports the Front Panel option
which includes:
• Reset Switch
• Four status LEDs. The functional definition for each LED is provided in sec‐
tion 1.9.2 LEDs, page 36
• COM3 Communications port via RS232/RS422 Serial Port
• Dual USB Ports
– Two USB ports on the front panel are a Type A (host) interface, capable of
supporting USB 1.0, 1.1, and 2.0 targets.
– Front Panel USB Ports are capable of supporting 1.5A power.
• One GbE via RJ45
For further information on the Front Panel, See Section 1.9 Front Panel of SBC622
(Convection Cooled Version) on page 34.
BIT functionality is provided by hardware in conjunction with installed software.
BIT is included for fault detection/isolation and real time determination of
operational status in all modes of operation. Contact the factory to order
configurations of the SBC622 that support BIT.