Table 1-1 Jumpers, Headers, Connectors - GE OpenVPX VPXcel6 SBC622 Hardware Reference Manual

24 SBC622 Hardware Reference Manual

Table 1-1 Jumpers, Headers, Connectors

Connector Function
P0 VPX Backplane Connector: Power Management
P1 VPX Backplane Connector: 10 GbE, Data Plane
P2 VPX Backplane Connector: PCIe x16
P3 VPX Backplane Connector: COM 1, PMC1 I/O
P4 VPX Backplane Connector: COM2, 4x GbE, 2x USB, XMC 1 I/O , Control Plane , GPIO
P5 VPX Backplane Connector: PMC 2 I/O, Audio Speaker
P6 VPX Backplane Connector: 3x SATA, XMC 2 I/O, DVI/VGA, 4X USB, 8x GPIO
P103 XDP Connector Debug Port
P104 XDP Connector Debug Port
J2 LAN1 Gigabit Ethernet Connector (Dual RJ45) Front Panel
J1, J3 USB Ports (Front Panel)
J10 Serial Port Connector (COM3) Front Panel
J11, J12, J13 and J14 PMC Site 1 Connectors (Onboard)
J15, J16 XMC Site 1 Connectors (Onboard)
J21, J22, J23, J24 PMC Site 2 Connectors (Onboard)
J25, J26 XMC Site 2 Connectors (Onboard)
Jumpers Function
E5 Front Panel COMPort Signal Configuration RS232, RS422
E7 GbE to VPX backplane or Front Panel
E17 CPLD JTAG Programming Header (Factory use only)
E32 RS422 Termination Selection for COM1/COM2
E500 XMC1_NV Memory Write Enable/Disable; SMBus Disable/Enable
E501 XMC2_NV Memory Write Enable/Disable; SMBus Disable/Enable
E502 RTC Reg Clr; CMOS Clr
E503 Expansion Plane (PCIe) Bus Configuration
E504 Expansion Plane (PCIe) Bus Non-Transparent Configuration; Override Flash Descriptor
E505 Onboard Flash Drive Disable; VPX SYSRESET# Control
E506 Front Panel COM Port Configuration