Advanced Setup Menu; Table B-3 Bios Advanced Menu - GE OpenVPX VPXcel6 SBC622 Hardware Reference Manual

B.3 Advanced Setup Menu
Main Advanced
Legacy OpROM Support
Launch Storage OpROM
PCI Subsystem Settings
ACPI Settings
S5 RTC Wake Settings
CPU Configuration
Onboard Device
Thermal Configuration
Port 80h
USB Configuration
Super IO Configuration
Serial Port Console Redirection
Network Stack
The Advanced BIOS firmware, Setup menu allows the user to configure some
CPU settings, the IDE bus, SCSI devices and other external devices and internal
drives.
Select the Advanced tab from the setup screen to enter the Advanced BIOS
firmware, Setup screen. You can select the items in the left frame of the screen,
such as Super I/O Configuration, to go to the sub menu for that item. You can
display an Advanced BIOS firmware, Setup option by highlighting it using the
<Arrow> keys. A sample of the Advanced BIOS firmware, Setup screen is shown
below.
NOTE
Changes in this screen can cause the system to malfunction. If problems are noted after changes
have been made, reboot the system and access the BIOS firmware. From the Exit menu select '
' and reboot the system. If the system failure prevents access to the BIOS
Failsafe Defaults
firmware, screens, refer to Section 1.7.1 Clear CMOS/RTC/Password on page 31 for instructions
on clearing the CMOS.

Table B-3 BIOS Advanced Menu

Aptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc.
Chipset Boot Security
[Enabled]
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Options shown may not be available on your system.
Save & Exit
Enable or Disable Boot Option
for Legacy Mass Storage
Devices with Option ROM.
_______________________________________
→← Select Screen
↑↓
Select Item
Enter: Select
+/- Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Load
Appendix B: BIOS Setup Utility 92
.