B • Appendix B: BIOS Setup Utility
B.1 First Boot Menu
This appendix gives a brief description of the setup options in the system BIOS
firmware. Due to the custom nature of GE's SBCs, your BIOS firmware, options
may vary from the options discussed in this appendix.
To Access the First Boot setup screen, press the
To access the setup screens, press the
The SBC622 has a First Boot menu enabling the user to, on a one time basis, select a
drive device to boot from. This feature is useful when installing from a bootable
disk. For example, when installing an operating system from a CD, enter the First
Boot menu and use the arrows keys to highlight ATAPI CD‐ROM Drive. Press
to continue with system boot.
ENTER
This feature is accessed by pressing the
cycle. The selection made from this screen applies to the current boot only, and
will not be used during the next boot‐up of the system.
If you have trouble accessing this feature, disable the QuickBoot Mode in the
Main BIOS firmware, setup screen. Exit, saving changes and retry accessing the
First Boot menu.
Table B-1 BIOS Firmware, First Boot Menu
SanDisk U3 Cruzer Micro 2.18
Enter Setup
ENTER to select boot device
key at the beginning of boot.
DEL
key at the very beginning of the boot
F7
Please select boot device:
↑ and ↓ to move selection
ESC to boot using defaults
key at the beginning of boot.
F7
Appendix B: BIOS Setup Utility 90
.