Table of Contents
Advertisement
62
Operation
6
The "enSuite" software and data interfaces of the EK280 can
be used to perform further applications other than those
described below. Instructions can be found under
www.elster-instromet.com.
6.1
Safety
6.1.1 Personal protective equipment
When working on the device inside a gas-handling plant, personal
protective equipment must be worn to minimize risks to health.
–
During works on the device, the necessary personal protective
equipment must be worn inside the respective plant at all times
–
The notices relating to personal protective equipment mounted in the
working area must be followed at all times.
6.2
Operating personnel
The following groups of people are authorized to perform different functions
when operating the EK280.
6.2.1 Instructed personnel
A person instructed on how to operate the EK280, who
–
will be informed of the tasks assigned to them and possible risks
resulting from inappropriate behaviour, in a training session provided
by the operator.
–
is authorized to read and take note of values and parameters using
the control elements of the EK280.
6.2.2 Qualified personnel
A person qualified to operate the EK280, who,
–
on the basis of their specialist training, knowledge and experience, as
well as their awareness of the relevant statutory provisions, are in a
position to perform their assigned tasks on the device and are able to
independently identify and prevent possible risks.
Operation
Advertisement
Table of Contents
