Sealing - Honeywell EK280 Operating Instructions Manual

Assembly, Connection and Putting into Operation

5.3.2 Sealing

5.3.2.1 External view
2
5.3.2.2 Internal view
These sealing points ( 4 ) to secure the pulse inputs and pulse
outputs are subject to national regulations (cf. WELMEC 11.1,
chapter 2.7.1).
Depending on the legal situation in the respective country of
use, seals produced by legally authorized manufacturers or the
metering point operators, should be used.
If the devices are supplied with connected input and/or output
cables, seals will be provided with the manufacturing symbol as
standard. If necessary, these can be replaced in the area of
application as described above.
EK280
Year: 2011
Serialno.: 1234567
M 11 0102
1
EC type-examination number:
T10339
MPE at ref. conditions 0,5%
IP65 EN12405-1
Instromet
Fig. 20
1
2
4
Fig. 21
1 Possible sealing point to
secure the identification
plate via adhesive seal.
2 Optional user lock: Seal
covers using wire seals
through sealing eyelets.
2
1 Sealing point to secure
the calibration switch.
2 Sealing points to secure
the circuit board cover
3 Sealing points to secure
3
the sensor covers for the
pressure and
temperature sensors.
V1 .3
4 Sealing points to secure
the terminal covers of the
inputs, outputs and
interfaces if necessary.
59