Verifying Assembly And Connection; Programming A Data Transfer - Honeywell EK280 Operating Instructions Manual

Assembly, Connection and Putting into Operation

5.3.4 Verifying assembly and connection

WARNING!
Risk as a result of incorrect assembly and connection
Incorrect assembly and connection of the EK280 may lead
to life-threatening situations.
Therefore:
– Assemble and connect the EK280 correctly.
– Sealing should solely be carried out by a calibration
– Follow the guidelines of DIN EN 60079-14,

5.3.5 Programming a data transfer

To discover the wide range of possibilities for remote data transfer to a
control center via the integrated modem or via a device connected to the
terminal interface, please follow the corresponding instructions in the
EK280 Application Manual, which you can download from www.elster-
instromet.com.
The data transfer settings can be configured without opening the calibration
lock.
officer.
DIN EN 60079-0, the ATEX Product Directive 94/9/EC
as well as the ATEX Operating Directive 1999/92/EC
EN.
61