Table of Contents
Advertisement
Operation
registers: "Main", "Cust.", "Admin", "Serv." and "Ctrl.". Registers can be
displayed and hidden for certain purposes using the "Menu" value.
Main – Content of the "Main" register
6.4.6.5
The content of the "Main" display register can be adjusted here.
The default setting is "volume+meas.". This corresponds to the content
displayed in chapter 6.3.1.
Display
volume+meas
.
volume short
volume long
volume,p,T,Q
List
Vb,Vo,meas.
Meaning
- The following are displayed: Volume at base conditions,
volume at measurement conditions, pressure, tempera-
ture, compressibility ratio factor and conversion factor
- Format: 8 pre-decimal and 3 post-decimal places for
counters
- With short descriptions for each value
- The following are displayed: Volume at base conditions
and volume at measurement conditions
- Format: 8 pre-decimal and 3 post-decimal positions
respectively
- With short descriptions
- The following are displayed: Volume at base conditions
and volume at measurement conditions
- Format: 9 pre-decimal and 4 post-decimal places
- Without short descriptions
- The following are displayed: Volume at base conditions,
volume at measurement conditions, pressure,
temperature, flow at base conditions and actual flow rate
- Format: 8 pre-decimal and 3 post-decimal places for
counters
- With short descriptions for each value
- The following are displayed: Volume at base conditions,
volume at measurement conditions, total meter reading
the original meter reading of the gas meter at Input DE1,
pressure, temperature, Conversion factor,
compressibility ratio factor, actual flow rate, flow at base
conditions, date and time
- The following are displayed: Volume at base conditions,
meter reading of the gas meter (Encoder), pressure,
temperature, compressibility ratio factor and conversion
factor
- Format: 8 pre-decimal and 3 post-decimal places for
counters
- With short descriptions for each value
79
Advertisement
Table of Contents
