Table of Contents
Advertisement
16
2.3
Personnel
WARNING!
Risk of injury to unqualified personnel.
Improper use of the device may lead to significant personal
injury or material damage.
Therefore:
– All works should solely be carried out by qualified
The following qualifications are used in the manual to denote different
areas of responsibility:
–
Instructed personnel
will be informed of the tasks assigned to them and possible risks
resulting from inappropriate behaviour, in a training session provided
by the operator.
–
Qualified personnel
who, on the basis of their specialist training, knowledge and
experience, as well as their awareness of the relevant statutory
provisions, are in a position to perform their assigned tasks on the
device and are able to independently identify and prevent possible
risks.
–
Gas specialists
who, on the basis of their specialist training, knowledge and
experience, as well as their awareness of the relevant standards and
regulations, are in a position to perform works on gas-handling
equipment and to independently identify possible risks. The gas
specialist will be specially trained in the respective area and will be
familiar with the relevant standards and regulations.
–
Calibration officers
who, on the basis of their specialist training, knowledge and
experience, as well as their awareness of the relevant standards and
regulations, are in a position to perform the works subject to
calibration regulations on gas-handling equipment. The calibration
officer will be trained on works on devices and installations subject to
calibration regulations and will be familiar with the relevant standards
and regulations.
personnel.
Safety
Advertisement
Table of Contents
