Power Supply Connector; Usb Dongle Cable - Honeywell Thor CV41 User Manual

CANBUS/Audio Port
Pin
9
10
11
12
13
14
15

Power Supply Connector

Power is supplied from the smart dock to the CV41 through the power connector. The
power supply connector also provides a connection point for the vehicle chassis ground
to be connected internally to the conductive chassis of the computer. The CV41 internal
power supply can accept DC input voltages in the range of 10 to 60 VDC.
4
3
2
Power Supply Connector
Pin
1
2
3
4
5
6

USB Dongle Cable

Use the USB dongle cable to connect USB devices, such as a USB flash drive to the
smart dock and CV41.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Signal Description
Mic return Microphone return
Audio return
GND Optional ground
CAN_SHLD
CAN_H CAN_H bus line dominant high
- CAN reserved
CAN_V+ Optional CAN external power supply
5
6
1
Signal Description
V In+ 10-60 nominal DC input +
V In+ 10-60 nominal DC input +
V In- Input -
V In- Input -
GND Chassis ground
Ignition +0 V to 60 V to start terminal
89