Optional Chemcam - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM

4.5.3 Optional ChemCam

The Vertex ChemCam option provides a means to observe the stains on the last window of a Chemcassette
tape. It consists of a small video camera located between the Chemcassette
The Vertex System records images of the stains in either AutoPicture mode or by a ChemCam Live capture.
See Section 3.6.3 Set Analyzer Window
Note:
Some faint stains may not be visible via the camera.
To use the ChemCam window, touch Main Screen, Review and then ChemCam.
ChemCam Live
Use the ChemCam Live tab to manually save an image to the ChemCam database.
1. Touch the image you have selected for capture. The border around the image will turn green.
2. Enter comments about the image in the Comment text box.
3. Touch Capture. The border on the image will turn red.
4. When the border returns to green, the capture is complete. Choose an additional image to capture or
touch Close.
Section 4 - Operation
for more information.
Figure 4-13. ChemCam Window
4-22
take up reel and the optic head.
®
®