Verify Flow Rates And Supply Vacuum; Verify Flow Rates - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM
3.8 Verify Flow Rates and Supply
Vacuum
After you have configured all analyzers, loaded
Chemcassettes and performed leak check, you will
®
verify flow rates in the Flow Diagnostics Window. From
Main Screen, touch Menu, Service, Authorized Service.
The Authorized Service window opens.
Note:
At higher altitudes with many analyzers installed, the system
(50 Hz. mains) may not be able to achieve 13" Hg.
Section 3 - Startup

3.8.1 Verify Flow Rates

The Authorized Service window displays the flow range
in bar graph form for each point of the selected analyzer.
Choose the analyzer from the selection pad in the upper
right-hand corner. Press the pump on button. The eight
points display their flow.
3-35