Configure Analyzers And Points - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM

3.6.2 Configure Analyzers and Points

Press "Configure Analyzer/Points" to change the right side of the Configuration window to a display representing
physical layout of the Vertex M System. Each slot is represented by a two-part button.
When you have configured an analyzer, the top of the button displays the type of analyzer and the gas family.
The bottom of the button is a second button for configuring each point within the analyzer.
Note:
Only analyzers on tier one should be configured. Configuring analyzers on tiers 2 or 3 will result in errors and
faults.
Two-part Button
Section 3 - Startup 3-19