Full Desktop Station Setup; Add Honeywell Software To Desktop; Create A "Honeywell Analytics" Account; Create Group "Vertexdcomusers - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM
A.13.4 Full Desktop Station Setup
This adapts a desktop computer for complete HMI
functionality including the Chemcam Viewer. However,
the Configuration Editor and Chemcassette installation
screens are not available remotely.
Vertex M Client is distributed on the Vertex M Application
Software CD.
Remote configuration is possible but requires changing
many security settings. Contact Honeywell Analytics for
information on permitting remote configuration.
WARNING
The procedures provided in this section require mak-
ing changes to your computer's security and component
settings. Only qualified personnel should undertake this
procedure.
A.13.4.1 Add Honeywell software to Desk-
top
The "VertexClient" software from Honeywell Analytics
must be installed in the desktop computer for correct
operation. Previous versions of VertexClient must be
removed before installing the newer version (Start/
Control Panel/Add or Remove Programs).
CAUTION
Protect both the remote station and the network between it
and the Vertex monitor from unauthorized contact. Software
changes increase the vulnerability of the Vertex rack to
malicious attack.
Appendix A - Network Interface and Options
A.13.4.2 Create a "Honeywell Analytics"
account
This is described in
Windows Accounts.
A.13.4.3 Create Group "VertexDCOMUsers"
This group is needed to facilitate acceptance of the
credentials of the two computers. To do this
1. Click on <Start>.
2. Then click-right on <My Computer>. Select
"Manage".
3. Navigate to Computer Management / System
Tools / Local Users and Groups / Groups.
4. Create a group "VertexDCOMUsers"
5. Add members "Everyone", "Interactive",
"Network" and "System" as shown in
A-13.
F-25
Section A.13.4.7 Create matching
Figure