Define And Assign Relays - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM

3.6.5 Define and Assign Relays

The Vertex M System includes multiple programmable relays. You may associate relays with one or more alarms
or faults to trigger external alarm devices or emergency equipment. Relays are located on relay cards; either
8 or 16 relays populate each card.
Note:
Relays are NOT factory configured.
Vertex M uses a two-part display to configure relays. The Configure PLC window displays the available relay cards
and contacts. In a second window, Vertex M also displays a representation of the analyzers installed in the system.
See Appendix A Optional Relay Specifications for a complete listing of alarm relay specifications.
Section 3 - Startup 3-28