Table of Contents
Advertisement
ACM 150
Setup Menus
Accessing the setup
View setup
Any user can view the setup program menus for the ACM 150 monitor. The setup
menu screens show how the ACM 150 monitor is currently configured.
Change setup
Only authorized users with an access code are permitted to change the setup
program. You must login before changes can be made. After making changes, logout
to prevent unauthorized changes to the setup.
Point configuration
All users can access this menu. The Point Configuration,
ACM 150 monitor sample points (areas) and their current status.
The chart below explains the status indicators and what they mean. Only the points
having a filled blue circle may be scanned by the ACM 150 monitor. However, the
filled circle does not indicate that the point is currently scanned. Points can only be
scanned if they are listed in the
Points with a blank circle have been configured, but they are on hold until they are
enabled. Such points can not be scanned. Use this to prevent scanning points that
are not ready, e.g if the tubing or the equipment to be monitored is not yet installed.
If you know the name for a point but not the gases to be monitored, you can assign
the name now and configure the gases later. If there is no status indicator next to the
point, it has not yet been configured.
Order of
scan.
81
Figure
46, shows all of the
Hide quick links:
Advertisement
Table of Contents
