About This Guide - Cisco 10000 Series Configuration Manual

About This Guide

This guide provides information about Access Network Control Protocol (ANCP) related features
supported on the Cisco 10000 series router and describes how to configure them.
Cross-platform features that function on the Cisco 10000 series router as they do on other supported
platforms, and platform-independent features that are supported on the Cisco 10000 series router are
described in the general Cisco IOS documentation.
This preface describes the following topics:
•
•
•
Guide Revision History
Cisco IOS Release
Release 12.2(34)SB
Description
Updated the following features:
•
•
•
•
•
•
OL-14660-03
Document Organization, page x
Document Conventions, page x
Obtaining Documentation and Submitting a Service Request, page xi
Part Number
OL-14660-03
Configurable Connect-Info Attributes—See the
page 5-26.
Layer 2 Overhead Accounting—See the
Multiservice Activation in an Access-Accept Message—See the
Access-Accept Message" section on page
Multiservice Activation or Deactivation in a CoA Message—See the
Deactivation in CoA Message" section on page
ATM support for Access Node Control Protocol—See the
section on page 1-1
ANCP enhancement for Ethernet OAM—See the
on page 2-1
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Publication Date
August, 2008
"Configurable Connect-Info Attributes" section on
"Layer 2 Overhead Accounting" section on page
"Multiservice Activation in an
3-1.
3-4.
"Access-Network Control Protocol"
"ANCP Enhancement for Ethernet OAM" section
7-1.
"Multiservice Activation or
ix