Service Policy Parameterized Actions - Cisco 10000 Series Configuration Manual

Router access network control protocol
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Chapter 5
Dynamic Service Policy Modifications

Service Policy Parameterized Actions

Table 5-2
corresponding RADIUS attribute syntax.
Table 5-2
Parameterized Actions for a Service Policy
MQC QoS Action
aaa attribute list list-name
authenticate aaa list list-name
classname class-name
ip access group
{access-list-number |
access-list-name} {in | out}
ip address pool name
ip portbundle
OL-14660-03
lists the QoS actions supported for the parameterization of service policies and the
RADIUS Attribute
aaa attribute list attr_list
authenticate aaa list auth_list
classname classname
ip access group ip_accgrp
ip address pool ip_addrpool
ip portbundle
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Description
Defines an authentication, authorization, and
accounting (AAA) attribute list locally on a router.
list-name or attr_list is the name of the local attribute
list.
Specifies authentication as a condition of service
activation and initiates authentication requests for
Intelligent Service Gateway (ISG) subscribers
accessing a service.
aaa specifies that authentication is to be performed
using an authentication, authorization, and
accounting (AAA) method list.
list list-name or auth_list specifies the AAA method
list to which the authentication request is sent.
Associates a Dynamic Host Configuration Protocol
(DHCP) pool or remote DHCP server with an
Intelligent Service Gateway (ISG) service
policy-map.
classname is the class name associated with a DHCP
pool or remote server.
Applies an access control list to control packet access.
access-list-number is the number of an IP access list.
access-list-name is the name of an IP access list.
in specifies the inbound direction.
out specifies the outbound direction.
ip_accgrp is the name or number of an IP access
group.
Enables the IP address of an interface to be
automatically configured when a Dynamic Host
Configuration Protocol (DHCP) pool is populated
with a subnet from IP Control Protocol (IPCP)
negotiation.
name or ip_addrpool is the name of the DHCP pool.
The IP address of the interface is automatically
configured from the DHCP pool specified in name.
Enables the Intelligent Service Gateway (ISG)
Port-Bundle Host Key feature for a service.
Parameterized Actions
5-7

Advertisement

Table of Contents
loading

Table of Contents