Configuration Examples For Setting The Ancp Corrected Rate - Cisco 10000 Series Configuration Manual

Chapter 7 Traffic Accounting
Command or Action
Step 3
ancp atm shaper percent-factor factor
Example:
Router(config)# ancp vdsl ethernet shaper
percent-factor 95
or
ancp vdsl ethernet shaper percent-factor factor
Example:
Router(config)# ancp vdsl ethernet shaper
percent-factor 95

Configuration Examples for Setting the ANCP Corrected Rate

The following example shows how to enable the ANCP-corrected rate for ATM-DSL, using a shaping
factor of 95 percent:
ancp atm shaper percent-factor 95
!
policy-map speed:eth:10600:5000:80/0
description parent shaper for premium
class class-default
shape 10600
service-policy premium
!
interface GigabitEthernet8/0/0.3128
encapsulation dot1q 3 second-dot1q 128
ancp neighbor name dslam id 000f.bb10.322f client-ID "10.2.3.4/0.0.0.0 atm 1/2:1.32"
pppoe enable group global
service-policy output speed:eth:10600:5000:80/0
The following example shows how to globally enable the ANCP-corrected rate for VDSL Ethernet. The
shaping factor is set to 90 percent.
interface GigabitEthernet1/1/0.30630256
!
interface GigabitEthernet1/1/0.30630269
!
ancp vdsl ethernet shaper percent-factor 90
!
OL-14660-03
encapsulation dot1Q 3063 second-dot1q 256
!
pppoe enable group mcast1
no snmp trap link-status
service-policy input set_precedence_to_0
service-policy output speed:eth:25100:5100:19/0
encapsulation dot1Q 3063 second-dot1q 269
!
pppoe enable group mcast1
no snmp trap link-status
service-policy input set_precedence_to_0
service-policy output speed:eth:25100:5100:19/0
ancp neighbor name 3063-10.157.9.10 id 000f.bb10.322f
dot1q 3063 second-dot1q 256 interface Gi1/1/0.30630256 client-ID "10.157.9.10/0.0.0.0
eth 2/1:7"
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Purpose
Enables ANCP cell tax accounting for ATM U-interface
connections.
factor specifies a percentage by which the ANCP-signaled
line rate is adjusted to account for overhead. Valid values
are 1 to 100 percent.
or
Enables subscriber link shaping for VDSL running
Ethernet at the U-interface.
The BRAS applies this factor to the
Note
ANCP-signaled new line rate to locally calculate
the correct line rate.
ANCP Corrected Rate
7-17