Cisco 10000 Series Configuration Manual page 35

Chapter 2 ANCP Enhancement for Ethernet OAM
show ancp neighbor port
This command provides a statistics of ANCP neighbor port information and the neighborship
information with local ANCP ports.
Syntax Description statistics
client-ID
Access-Loop-Circuit ID
name neighbor-name
Command Default
Show statistics for all ports.
Command Modes
Global configuration.
Command History Release
12.2(28)ZV2
Examples The following example shows sample output that appears when you enter the show ancp neighbor port
statistics command:
Remote Peer Line Statistics
===========================
3
1
0
0
4
The following example shows sample output that appears when you enter the show ancp neighbor port
name neighbor-name command:
Neighbor
Name/ID
--------- ----------------------- ------------- --------- ---------
VendorB_10.3.1.2/10.3.1.2
VendorC_10.3.1.2/10.3.1.2
VendorA_10.3.1.2/10.3.1.2
OL-14660-03
show ancp port [statistics | client-ID "Access-Loop-Circuit-ID" name neighbor-name]
Displays a summary of ANCP neighbor port statistics.
When this optional parameter is specified, only information related to the
port appears. The Access-Loop-Circuit-ID is a unique ID that the DSLAM
sends to the BRAS for each unique port.
Identifies an ANCP session. When neighbor-name as an optional parameter
is specified, only information related to that neighbor appears.
Modification
This command was introduced and implemented on the Cisco 10000 series
router.
DSL lines in UNKNOWN state
DSL lines in SHOWTIME state
DSL lines in IDLE state
DSL lines in SILENT state
Total DSL Lines
Access Loop Circuit ID
10.3.1.2 eth 1/162 3:11 0/0
10.3.1.2 eth 1/162 3:21 0/0
10.3.1.2 eth 1/162 3:10 45078/89560
10.3.1.2 eth 1/161 3:9
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Up/Downstream DSL Line
(kbps) State
IDLE
SILENT
SHOWTIME
0/0 UNKNOWN
show ancp neighbor port
ANCP Port
State
DOWN
DOWN
UP
DOWN
2-5