System Control Module - GE ÄKTA pure Operating Instructions Manual

3 The instrument and software
3.2 UNICORN software

3.2.2 System Control module

3.2.2 System Control module
Introduction
The System Control module is used to start, view, and control a manual or method run.
System Control panes
As seen in the following illustration, three panes are shown in the System Control
module by default.
The Run Data pane (1) presents current data in numerical values.
The Chromatogram pane (2) illustrates data as curves during the entire run.
The current flow path is illustrated in the Process Picture (3), which allows manual inter-
actions with the system and provides feedback on run parameters.
Note:
46
On the View menu, click Run Log to open the Run Log pane which presents
all registered actions.
ÄKTA pure Operating Instructions 29-0229-97 AE