Card-Level Leds On The Channelized (Stm-1/Oc-3) Line Card - Cisco ASR 5000 Series Installation Manual

▀ Verifying the Installation
Table 72. Alarm/Link States for Optical (ATM) Line Card
LED LED Color
Red Alarm Red (ON)
OFF
Yellow Alarm Yellow (ON)
OFF
Link Green (On)
Yellow (On)
OFF

Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card

Each Channelized line card (CLC2) is equipped with card-level status LEDs:
 Run/Fail
 Active
 Standby
The location of these LEDs is displayed in the figure below. The various states are described in the following three
tables.
▄ ASR 5000 Installation Guide
178
Description
Illuminates when the port is in a fault condition, such as LOS or LOF.
Off when there is no alarm for this port.
Illuminates when the port is receiving a signal indicating a problem at the remote end, for
example, RDI.
Off when there is no alarm for this port.
Illuminates Green when a fiber optic cable is plugged into the port and the receive signal
is detected by the SFP module.
Illuminates Yellow when an SFP module is plugged into the port.
Off indicates that there is no SFP module plugged into the port.
Applying Power and Verifying the Installation