Line Card Leds - Cisco 8800 Series Hardware Installation Manual

LEDs
Table 17: Fabric Card LED Descriptions
LED
ATTN
(Attention)
STS

Line Card LEDs

The line card has LEDs located on the right of the front panel.
Table 18: Line Card LED Descriptions
LED
ATTN
(Attention)
Color Status
Flashing blue The operator has activated this LED to identify this module in the chassis.
Off This module is not being identified.
Green The fabric card is operational with no issues.
Flashing green Auto or manual FPD upgrade in-progress.
Amber The module is in one of the following states:
• Power cycle
• Reload or reimage
• Shutdown
Flashing red The fabric card has major or critical alarms.
Flashing The module has minor alarm.
amber
Off No power is going to the fabric card.
Color Status
Flashing blue The line card is activated.
Off The line card is not enabled.
Hardware Installation Guide for Cisco 8800 Series Routers
Line Card LEDs
83