Line Card Leds - Cisco 8800 Series Hardware Installation Manual

Line Card LEDs

Note The fabric cards are located behind the fan tray. Therefore, the fabric card LEDs are seen when the fan tray
is removed.
Table 18: Fabric Card LED Descriptions
LED
ATTN
(Attention)
STS
Line Card LEDs
The line card has LEDs located on the right of the front panel.
Table 19: Line Card LED Descriptions
LED
ATTN
(Attention)
Hardware Installation Guide for Cisco 8800 Series Routers
94
Color Status
Flashing blue The operator has activated this LED to identify this module in the chassis.
Off This module is not being identified.
The fabric card is operational with no issues.
Green
Flashing green Auto or manual FPD upgrade in-progress.
Amber The module is in one of the following states:
• Power cycle
• Reload or reimage
• Shutdown
Flashing red The fabric card has major or critical alarms.
Flashing The module has minor alarm.
amber
Off No power is going to the fabric card.
Color Status
Flashing blue The operator has activated this LED to identify this module in the
chassis.
Off The line card is not enabled.
LEDs