Cisco ASR 5000 Series Installation Manual page 80

▀ Installing the Chassis
Step c
chassis.
Step d
step c.
Step 2
Re-install the lower fan tray assembly into the chassis.
Step a
the lower fan tray bay of the chassis. The lower fan tray bay is located at the bottom front of the chassis.
Step b
the chassis and can go no further.
Step c
fan tray assembly and its tab should be lowered to keep it in place.
▄ ASR 5000 Installation Guide
80
Use a Phillips #2 screwdriver to tighten each of the four screws on the PFU to secure it to the
Re-install the second PFU in the PFU bay labeled Power Filter Unit 2 by repeating step b and
Hold the front of the fan tray by its handle with one hand and use your other hand to align it with
Slowly slide the fan tray into the chassis along the guides using its handle until it is seated firmly in
Verify that the particulate filter is securely in place. Its front should be flush with the front of the
Chassis Installation