Cisco ASR 5000 Series Installation Manual page 47

ASR 5000 Hardware Platform Overview
Figure 18. Optical Line Card (OLC2)
Table 19. OLC2 (ATM) Callouts
Item Description
1 Card Ejector Levers—Use to insert/remove card to/from chassis.
2
Interlock Switch—In its Down position, the interlock switch notifies the system to safely power down the card prior
to its removal.
3
Card Level Status LEDs—Show the status of the card.
4 Port connectors—Fiber LC duplex female connector.
5
Port Level Status LEDs—Show the status of a port.
6 Line Card Label—Identifies the type of SFP modules and cabling supported:

OLC2, OC-3/STM-1, Single Mode

OLC2, OC-3/STM-1, Multi-Mode
Line Cards ▀
ASR 5000 Installation Guide ▄
47