Adding Application and Line Cards to an Existing Installation
Important:
rail.
Step 6
Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the front panel to secure the card to the
chassis.
Step 7
Repeat step 1 through step 10 for every other line card that to be installed.
Step 8
Proceed to the appropriate chapter for information on connecting data cables to the line cards.
You must slide the interlock switch upward before securing the card's top screw to the mounting
Adding a 10 Gigabit Ethernet Line Card ▀
ASR 5000 Installation Guide ▄
205