Db-9 To Rj-45 Adapter - Cisco ASR 5000 Series Installation Manual

▀ Connecting to the Serial Console Port

DB-9 to RJ-45 Adapter

SPIOs are shipped with an RJ-45-to-RJ-45 serial cable and an RJ-45-to-DB-9 adapter. The DB-9S conductor on the
adapter is female. If you use the cable and adaptor together, refer to the following figure and table.
Important:
must provide a carrier-detect signal.
Figure 33.
Table 35. SPIO Console Cable Pinouts
SPIO Console Port Interface
Signal
Clear to Send (CTS)
Data Set Ready (DSR)
Receive Data (RxD)
Signal Ground (SGND)
Ready To Send (RTS)
Transmit Data (TxD)
Data Carrier Detect (DCD)
Data Terminal Ready (DTR)
▄ ASR 5000 Installation Guide
114
If the console cable is to be used in a null-modem configuration, the workstation or terminal server
SPIO Console Cable and DB-9 Adapter Pinouts
Signal Type
Input
Input
Input
N/A
Output
Output
Input
Output
Console Cable
RJ-45 Pin RJ-45 Pin
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Cabling the Switch Processor Input/Output Line Card
RJ-45-to-DB-9 Adapter
DB-9S Pin Signal
7 RTS
4 DTR
3 TxD
5 SGND
8 CTS
2 RxD
1 DCD
6 DSR