Cisco ASR 5000 Series Installation Manual page 100

▀ Installing Half-Height Line Cards
Important:
rail.
Step 8
Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the line card's front panel to secure the card
to the chassis.
Step 9
Repeat step 1 through step 7 to install other line cards.
Step 10
Install blanking panels over any unused chassis slots.
W
ARNING
cover any chassis slot that is not occupied by an application card. Leere Steckplaetze muessen mit der dafuer
vorgesehenen Abdeckplatte geschlossen werden, um die Luftzirkulation innerhalb des Geraets zu gewaehrleisten und
um einen elektrischen Schlag zu vermeiden.
Step a
Step b
secure the panel to the chassis.
Step c
Step 11
Proceed to the appropriate chapter for information on connecting data cables to the line cards.
▄ ASR 5000 Installation Guide
100
You must slide the interlock switch upward before securing the card's top screw to the mounting
:
To reduce the risk of electric shock and to ensure proper ventilation, blanking panels must be used to
Position the blanking panel over the unused chassis slot.
Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the blanking panel to
Repeat step a and step b for any additional unused chassis slots.
Line Card Installation