Fiber Sfp Interface; 10/100/1000 Mbps Rj-45 Interface - Cisco ASR 5000 Series Installation Manual

▀ Interface Specifications

Fiber SFP Interface

The fiber Small Form-factor Pluggable (SFP) interface has two host connectors that receive SFP transceivers.
Table 92. Fiber SFP Interface Transmit and Receive Levels

10/100/1000 Mbps RJ-45 Interface

The two RJ-45 interfaces are auto-sensing 10/100/1000 Ethernet (10Base-T/100Base-TX/1000Base-T) that require
unshielded twisted pair (UTP) copper cable. Refer to the following figure and table for pin-outs for the RJ-45 Ethernet
ports.
Table 93. SPIO RJ-45 Ethernet Interface Pinouts
Pin
1
2
3
4
5
6
7
8
▄ ASR 5000 Installation Guide
266
Signal Level
Max TX: 0 dBm
Min TX: -9.5 dBm
Max RX: 0 dBm (saturation average power)
Min RX: -20 (typical) / -17 (max.) dBm (sensitivity average power)
10Base-T 10Mbps Cat3 100Base-Tx 100Mbps Cat5
TX+ TX+
TX- TX-
RX+ RX+
Not used Not used
Not used Not used
RX- RX-
Not used Not used
Not used Not used
1000Base-Tx 1Gbps Cat5+
BI DA+
BI DA-
BI DB+
BI DC+
BI DC-
BI DB-
BI DD+
BI DD-
Technical Specifications