Configuring With Valvue Esd; Starting Valvue Esd/Esdvue; Valvue Esd Icon - GE Masoneilan SVI II ESD Installation And Maintenance Manual

Configuring with ValVue ESD

ValVue ESD provides advanced diagnostic, maintenance capabilities and complete calibration
and configuration for SVI II ESD. The software also performs scheduled and on demand Partial
Stroke Testing (PST), performs valve diagnostics (proof testing) and provides results in graphic,
informational and historical formats. The software has a database to store test results to
compare with future results for predictive maintenance. It is password protected against
access to remote instruments. It is set up with different administration level features.
ValVue ESD is the most complete and easiest to use configuration tool. ValVue ESD is delivered
with each SVI II ESD. ValVue ESD provides a personal computer interface for configuring and
calibrating SVI II ESD. Use of these tools is recommended. See the ValVue ESD On Line Help.

Starting ValVue ESD/ESDVue

ValVue ESD creates an icon on your desktop during installation as shown below. Start ValVue
ESD by clicking on the icon or activate it by selecting Windows Start\Programs\ValVue
ESD\ValVue ESD.
94 |
=GE Oil & Gas
Never connect ValVue ESD software to an SVI II ESD while
NOTE
configuring or calibrating using pushbuttons.
Figure 59 ValVue ESD Icon
© 2016 General Electric Company. All rights reserved.